NeXus-10
Wireless Bluetooth
Biofeedback
Ten years of designing data acquisition and sensor systems, advanced signal processing experience and software development has culminated in the development of this multifunctional, flexible and state-of-the-art data acquisition platform.
Through the Nexus-10, we are proud to offer you a Bluetooth enabled solution with internal Flash memory. (for storage of up to 24 hours of data) NeXus-10 offers very high resolution 24 bit data acquisition at up to 2048 samples per second. The built-in state of the art pre-amplifiers measure any electrophysiological signal from DC to 800Hz including raw EMG, EOG and Slow Cortical Potentials. (SCP’s) Because it uses low noise carbon based cables, expensive active sensors are no longer required for electrophysiological signals such as ECG, EMG, EEG, EOG and SCP
Typical applications:
- Biofeedback applications
- Physiological research
- Clinical Psychophysiology
- Wireless data logging up to 24 hrs
- Physical Medicine
- Movement Analysis
- Neurofeedback & SCP training
- Sports physiology
- Human performance & movement analysis
- Wellness, Stress response studies
- HRV (heart rate variability) research
Minimum PC hardware requirements:
For optimal use of your BioTrace+ software in combination with your NEXUS-10 Physiological Monitoring and Feedback platform, you will minimally need a Microsoft Windows™ based PC or Notebook with the following features:
- Windows ™ XP Home with Service Pack 2 (SP2). Please note that we now strongly advise Windows XP with Service Pack 2 because of the integrated Bluetooth support. Whether it is Home or Professional is not important.
- At least a 1.4 Ghz AMD or Intel processor and CDROM drive
- 256 MB memory. (512 MB or more highly recommended)
- 20 Gigabyte free on your harddrive for storage of physiological data
- 16 bit soundcard on board, or as an PCI card.
- 1 free USB 1.1 connection for the BlueTooth communication
- 1 Graphics card with XGA (1024*768) resolution or better. (DirectX 9.0C or newer)
- NVidia 5200 or ATI 9000 or better graphics accelerator card is required.
- 15 Inch CRT or TFT monitor
Recommended PC hardware requirements:
For optimal use we recommended the following configuration:
- Windows XP Home with Service Pack 2 (SP2) or XP Professional. Please note that we now strongly advise Windows XP with Service Pack 2 because of the integrated Bluetooth support. Whether it is Home or Professional is not important.
- 2.4 Ghz or faster AMD or Intel processor, DVD drive or DVD write
- 512 MB or 1 GB of memory
- 50+ Gigabyte free harddisk space for storage of physiological data
- Soundblaster Live or Audigy soundcard with good speakers.
- 2 Free USB 1.1 or 2.0 connections. 1 for Bluetooth, 1 for a video camera
- 1 Graphics accelerator card with dual monitor support. NVidia 5200 or ATI 9200 or better. Recommended resolution: 1280x1024 on primary display. Secondary display can be 800x600 or 1024x768. DirectX 9.0C or newer.
- 17 Inch TFT for primary display. (beamer or 15/17 Inch monitor for secondary display)
- A Laserprinter for printing of physiological data and reports
- A 100Gb+ external media for backup of stored session data and video files
For more information about the NeXus-10, email Stens Corporation, visit their website at www.stens-biofeedback.com or call 1(800) 257-8367.
Back to Biofeedback and Psychometric Tests
Back to Books and Other Products
